Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

Tekin RS GEN SPEC Sensored Brushless ESC/GEN 3 Motor Combo (17.5T)

$286.00
SKU:
TT2743
Brand:
Shipping:
Calculated at checkout
Quantity:
This product is available for pre-order only

Product Description

The RS GEN2 SPEC is designed for Spec racing and offers professional performance at an affordable price. True ROAR Spec mode only, no timing or boost features are available. The RS SPEC brings racer-friendly tuning and flawless operation to the world of Spec racing.

 

Packed with new features, the RS GEN2 SPEC provides an EZ Access Port for HotWirecommunication and Datalogging capabilities in a small sized package. Rated for 13.5 turn motors and higher, the GEN2 is the perfect ESC for both experienced and new racers. Couple the RS GEN2 SPEC with a Redline GEN3 brushless motor for the ultimate package in Spec racing equipment.

 

 

Controls: Forward/Brake/Reverse

Input Voltage: 2S LiPo / 4-7S NiMH-NiCD

 

Motor Limit Brushless Mode 2S: 13.5T 2-pole 36mm Can

Motor Limit Brushed 2S: 20Turn, 36mm Can

 

Max Current: 60amps per phase*

 

BEC: 6.0v / 3.7amps

Dimensions: 1.0 x 1.3 x .51in / 26 x 34 x 12.9mm

Weight: .80oz / 22.5g


 ROAR Spec Mode only - no Timing features

 QuickTune™ One Touch Programming

 Adjustable Torque Control *

 Adjustable Throttle and Brake Frequencies *

 HotWire™ Programming Port *
 Data Logging Capability *
 Sensor Checker
 On-Board Temperature Indicator

 ESC Self Diagnostics with Error Codes
 Fully Proportional Forward/Brake/Reverse

 Brushless and Brushed Motor Drive

 Sensored or Sensorless Operation

 LiPo Safe with Custom Voltage Cutoffs

 Sensor Plug for Precise Commutation
 HDAC: High Density Copper PCB's
 Ultra-smooth and Precise Throttle and Braking Control


* requires HotWire™ sold separately.

ON BOARD QuickTune™ PROGRAMMABLE FEATURES

 DB - Drag Brake (13 steps)

 BS - Brake Strength (13 steps)

 LM - Torque Limiter (7 steps)

 NW - Neutral Width (13 steps)

 TP - Throttle Profiles 5 Preset - 2 Custom*

 MT - Motor Type

Brushless Modes - FWD Only / FWD-REV / FWD-REV Delay / FWD-REV Delay REV Motor Direction

Brushed Modes - FWD Only / FWD-REV / FWD-REV Delay

 VC - Voltage Cutoff : 2S, 3S, Custom* 
                                   

 

Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.

 

 

 

The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.

 

 

 

The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.

 

 

nput Voltage: 2S - All

 

                       3S - 10.5 and up

 

Weight: 161g / 5.7oz

 

Shaft Dimensions: 3.2mm (1/8") x 15.3mm

 

Motor Diameter: 35.85mm / 1.40"

 

Motor Length: 50mm / 1.909"

 

Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"

 

Rotor Size: 12.3mm - 25.5T

 

                   12.5mm - 21.5T rpm* / 17.5T rpm / 13.5T rpm / 21.5T / 17.5T / 13.5T / 10.5T / 9.5T / 8.5T

 

                   13mm - 7.5T / 6.5T / 5.5T / 4.5T / 4T / 3.5T / 2.5T

 

                   13mm Torque - 3.5T / 2.5T

 

Rebuildable: Yes

 


 CNC Machined 6061-T6 Billet Aluminum Heat Sink Can

 Neodymium Sintered Magnet

 Precision Engineered for Maximum Energy Conversion

 High Purity Copper Windings Maximize Conductivity

 Low Resistance, High Power Solder Tabs

 Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems

 Anodized End-bell plates maximize corrosion and wear resistance

 High RPM Precision Bearings

 Rebuild-able Design

 Solder-less Sensor PCB replacement

 Adjustable Timing

 Standard and RPM versions

 

 

 

 

 

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review