Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4

Tekin RS Gen2 Sensored Brushless ESC/Redline GEN 3 Motor Combo (13.5T RPM)

$341.00
SKU:
TT2734
Brand:
Shipping:
Calculated at checkout
Quantity:
This product is available for pre-order only

Product Description

This is the Tekin RS Gen2 Sensored Brushless ESC/Motor Combo with an included 8.5 Turn Modified Series Tekin Gen3 Motor. The Tekin RS legacy continues with the GEN2 brushless speed control, the next generation in intelligent motor drive technology. The RS GEN2 is fitted with state of the art components to deliver what racers demand; reliability, precise control and unmatched power handling capability. Packed with updates, the RS GEN2 features a programmable 6.0-7.4V high-voltage BEC, an EZ Access Port for HotWire communication and Data-logging capabilities, and its all wrapped up in a pint sized package. Rated for 8.5 turn motors and higher, the GEN2 is the perfect ESC for both vetran and novice racers.

ESC Features: 

  • Couple the RS GEN2 with a Redline GEN2 brushless motor for the ultimate race package!
  • Ultra-smooth and Precise Throttle and Braking Control
  • Compatible with Sensored/Sensorless Brushless and Brushed Motors
  • Easily Access Programming, Anywhere, Anytime
  • Datalogging Capability
  • High Voltage Programmable BEC
  • EZ Access HotWire Programming Port
  • HotWire PC Interface for Advanced Programming and Updating
  • D2: Dual Drive Mode Technology
  • On-Board Temperature Indicator
  • HDAC: High Density Copper PCB's
  • Sensor Plug for Precise Commutation with all Motors
  • Gold-plated Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune™ Programming
  • One-Touch Radio Calibration 

ESC Programming Features: 

  • High Voltage BEC (6.0v/7.4v)*
  • Drag Brake (13 steps)
  • Brake / Reverse Strength (13 steps)
  • Current Limiter (none + 12 steps)
  • Neutral Width (13 steps)
  • Timing Profiles (5 preset - 2 custom*)
  • Adjustable Throttle and Brake Minimums
  • Custom Throttle Curves
  • Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
  • Voltage Cutoffs (none, 2S, 3S, Custom)
  • Timing Boost and Turbo when used with Hotwire
  • ROAR Race Spec "Blinky" Mode
  • Save, Load and Share custom ESC setup files
  • Extensive Tuning via Tekin HotWire PC Interface 

*NOTE: Requires HotWire Gen 3 Interface (TT1452) - Sold Separately 

Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.

 

The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.

 

The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.

 

 

 CNC Machined 6061-T6 Billet Aluminum Heat Sink Can

 

 Neodymium Sintered Magnet

 

 Precision Engineered for Maximum Energy Conversion

 

 High Purity Copper Windings Maximize Conductivity

 

 Low Resistance, High Power Solder Tabs

 

 Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems

 

 Anodized End-bell plates maximize corrosion and wear resistance

 

 High RPM Precision Bearings

 

 Rebuild-able Design

 

 Solder-less Sensor PCB replacement

 

 Adjustable Timing

 

 Standard and RPM versions

 

 

 

Input Voltage: 2S - All

 

                       3S - 10.5 and up

 

Weight: 161g / 5.7oz

 

Shaft Dimensions: 3.2mm (1/8") x 15.3mm

 

Motor Diameter: 35.85mm / 1.40"

 

Motor Length: 50mm / 1.909"

 

Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"

 

Rotor Size: 12.3mm - 25.5T

 

                   12.5mm - 21.5T rpm* / 17.5T rpm / 13.5T rpm / 21.5T / 17.5T / 13.5T / 10.5T / 9.5T / 8.5T

 

                   13mm - 7.5T / 6.5T / 5.5T / 4.5T / 4T / 3.5T / 2.5T

 

                   13mm Torque - 3.5T / 2.5T

 

Rebuildable: Yes

 

 

 

*RPM = High RPM On Road Version

 

 

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review