Description
Tekin’s SPEC-R brushless motors are engineered for award-winning performance. Utilizing the best materials available we redesigned the SPEC-R to cut weight while reducing resistance, resulting in a purebred Spec racing machine. On Road or Off, the SPEC-R handles all situations, providing smooth power and control across all RPMs when you need it. The SPEC-R is competition performance with the speed you need to win. Pair with an RS PRO Black Edition for the ultimate in SPEC Racing Equipment.
The GEN4 motor line is a completely new ground-up design. We put in the design and test time so you can reduce your lap times. The new stator is precision stamped and pressed, increasing efficiency and reducing resistance. Our motors are hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and re-buildable, the new GEN4 SPEC-R motor is a premium performance power plant for the serious racer.
Input Voltage: 1-2S LiPO - 25.5T / 21.5T / 17.5T / 13.5T / 10.5T / 6.5T
Weight: 5.1oz / 145g
Shaft Dimensions: 3.18mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 50.25mm / 1.978"
Max Operating Temperature: 180°F / 82°C
Bearing Dimensions: Front: 4x13x5mm
Rear: 1/8x3/8x5/32"
Rotor Size: 12.3mm BLACK - 25.5T
12.5mm BLUE - 21.5T / 17.5T / 13.5T / 10.5T
Rebuildable: Yes
OFF ROAD
1:10 2WD Stock Buggy
1:10 2WD Stock Truck
1:10 2WD Stock Short Course
1:10 4WD Stock Buggy
ON ROAD
1:12 2WD Pan Car
1:10 2WD Pan Car
1:10 World GT
1:10 Formula 1
1:10 4WD Stock Touring Car
1:10 Drift
OVAL
1:10 2WD
1:10 SK Car
1:10 Stock Car
1:10 Winged Sprint
1S LiPo Classes
60 Degrees Adjustable Timing Advance SPEC Racing Specific Design CNC Machined 6061-T6 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnet
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity
Low Resistance, High Power Solder Tabs
Sensored System Ready
Anodized End-bell Plates Maximize Corrosion and Wear Resistance
High RPM Precision Bearings Oversized Front Bearing
Rebuild-able Design
Solder-less Sensor PCB Replacement Legal in Major Race Governing Bodies ROAR Approved
MOTOR ONLY
TT2760 - 25.5T SPEC-R GEN4 Motor
TT2761 - 21.5T SPEC-R GEN4 Motor
TT2762 - 17.5T SPEC-R GEN4 Motor
TT2763 - 13.5T SPEC-R GEN4 Motor
TT2764 - 6.5T SPEC-R GEN4 1:12 Motor
TT2765 - 10.5T SPEC-R GEN4 Motor
SYSTEMS
RS GEN3 SPEC
TT2791 - RS GEN3 SPEC / 21.5T GEN4 SPEC-R System
TT2792 - RS GEN3 SPEC / 17.5T GEN4 SPEC-R System
TT2793 - RS GEN3 SPEC / 13.5T GEN4 SPEC-R System
RS GEN3
TT2794 - RS GEN3 / 21.5T GEN4 SPEC-R System
TT2795 - RS GEN3 / 17.5T GEN4 SPEC-R System
TT2796 - RS GEN3 / 13.5T GEN4 SPEC-R System
TT2797 - RS GEN3 / 10.5T GEN4 SPEC-R System
RS PRO BLACK EDITION
TT2807 - RS PRO BE / 21.5T GEN4 SPEC-R System
TT2808 - RS PRO BE / 17.5T GEN4 SPEC-R System
TT2809 - RS PRO BE / 13.5T GEN4 SPEC-R System
MOTOR PARTS
TT2786 - Redline GEN4 Full Rebuild Kit
TT2787 - Redline GEN4 End Cap Set & Hardware
TT2789 - Redline GEN4 Sensor PCB
TT2790 - Redline GEN4 Solder Tabs & Isolator
BEARINGS
TT2788 - Redline GEN4 Bearing Set
Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
TT3849 - Redline GEN4 Ceramic Bearing Set
Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
TUNING ROTORS
TT2775 - 12.3mm 25.5T ROAR Spec Rotor - BLACK
TT2776 - 12.5mm SPEC-R Rotor - BLUE
SENSOR CABLES
TT3835 - FlatWire 100mm Ribbon Sensor Cable
TT3836 - FlatWire 150mm Ribbon Sensor Cable
TT3837 - FlatWire 200mm Ribbon Sensor Cable
TT3838 - FlexWire 100mm Sleeved Sensor Cable
TT3839 - FlexWire 150mm Sleeved Sensor Cable
TT3840 - FlexWire 200mm Sleeved Sensor Cable
TT3841 - FlexWire 275mm Sleeved Sensor Cable
Related Products
Related Products
Tekin Spec-R 25.5 T Gen-4 Motor
Tekin
Tekin Spec-R 10.5 T Gen-4 Motor
Tekin
Tekin Spec-R 17.5 T Gen-4 Motor
Tekin
Tekin Spec-R 21.5 T Gen-4 Motor
Tekin
Tekin RS Gen 3 / 17.5T Gen 4 Spec-R System
Tekin