RC-Project
RC-Project - Kit Standoff in Ergal 7075-T6 for HB Racing D817/D819 "PRO DRIVER"
(No reviews yet)
Write a Review
- SKU:
- RCPJ-HB819-008
- Shipping:
- Calculated at Checkout
Description
The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact Surface between Bushing and Standoff; this allows a life of the Standoff and the relative Bushing of 600% more than the whole Competition.
To finish a Hard Coating and Teflon Treatment allows to reduce the friction between Bushing and Standoff, all this has allowed us to Guarantee 30/35 Liters without replacing Standoff and Bushing .
To decrease the suspended masses and improve driveability, you will also find the corresponding Titanium Grade 5 6Al4V Allen Screw with Rolled Thread.
Replacing HB67202
Related Products
Related Products
RC-Project - Shock Pins in Ergal 7075-T6 for HB Racing D819/D817V2/E817V2
RC-Project
$25.00
The Shock Pins are Made in Italy with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ.
Diameters have been...
Out of stock
RC-Project - Kit Balls "REVERSE" in Ergal 7075-T6 for HotBodies 819
RC-Project
$33.00
The Balls are Made in Italy with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ
.In addition, a...
RC-Project - Ergal 7075-T6 Hex Socket Flat Head Screw for HB D817-HB E817-HB D817T Side guard
RC-Project
$18.00
The hex socket screws are made in Italy with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet. The weight savings compared to the original hex socket screw...
RC-Project Shock Caps V2 TNG for HB Racing D8
RC-Project
$89.99
The whole project has been revised compare
RC-Project - One Piece Wing Button in Ergal 7075 T6 - Green
RC-Project
$15.00
Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.
It is very light and resistant and will help to support the wing in case...