Team Associated

This is a pair of (2) Patented VRP 'XV3' Pistons -  5 Hole 1.5mm Flats. The pistons come with the Transition  Vaves (not installed). The Rebound booster hole has been precision drilled to the exact size our testing found to be the best...

VRP Super Shock Seal O-Ring Grease w/Teflon is great for your shock and diff orings.  Apply a small amount to extend the lifespan of your orings.  Comes in a handy pop top storage container along with stir/applicator stick...

This is a pair of (2) Patent-Pending VRP 'XV3' Pistons -  8 Hole 1.2mm Flats. The pistons come with the Transition  Vaves (not installed). The Rebound booster hole has been precision drilled to the exact size our testing found to be...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts...

This is a pair of (2) Patent-Pending VRP 'XV3' Pistons -  6 Hole 1.3mm Flats. The pistons come with the Transition  Vaves (not installed). The Rebound booster hole has been precision drilled to the exact size our testing found to be...

This is a pair of (2) Patent-Pending VRP 'XV3' Pistons -  8 Hole 1.3mm Flats. The pistons come with the Transition  Vaves (not installed). The Rebound booster hole has been precision drilled to the exact size our testing found to be...

VRP Gear/Pinion Gear Honey Grease is the perfect grease for your ring and pinion gears.  Its super sticky, but after a run or two, frees up and provides greater life span of your gears.  Comes in a pop top container for storage, as well as a...

The Shims are produced in Stainless Steel and adapt perfectly to any engine .21. Inserted before the cone they help move the Flywheel forward helping to create a perfect Clutch / Bell coupling. Pack of 6 Pieces.

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo. It is very light and resistant and will help to support the wing in case of violent impacts...

This is a (4) Pack of Standard Valves for the VRP 'XV3' Pistons.  They are Laser Cut for accuracy and alignment.